Home > PU Flooring in Bangladesh
PU Flooring in Bangladesh
Seamless, hygienic and heavy-duty polyurethane floors for factories across Bangladesh – manufactured at our own plant in Gazipur and installed by our own team, from about ৳140 per sq ft.





What Is PU Flooring and Why Do Bangladeshi Factories Choose It?
PU flooring is a seamless polyurethane floor laid about 2–6 mm thick over concrete. In Bangladesh it has become the preferred floor for food and beverage plants, pharmaceutical units, garment washing and dyeing sections, cold stores and automobile factories, because it copes with conditions that bare concrete and thin epoxy coatings cannot: hot-water wash-down, steam cleaning, thermal shock, chemicals and constant trolley traffic. The most widely used type is PU concrete (also called PU screed or PU cement) – a three-part system of polyurethane resin, hardener and graded cement-aggregate powder. DPF's PU concrete is Ducrete MF, produced at our factory in Kaliganj, Gazipur.
Factory owners in Bangladesh choose PU flooring for:
- Thermal shock resistance - Handles hot-water and steam cleaning and sudden hot–cold changes in kitchens, beverage lines and cold stores.
- Chemical and food resistance - Resists food acids, oils, fats, sugars, dyes and common cleaning chemicals.
- Wet-area safety - A textured finish keeps the floor slip resistant when it is wet.
- Hygiene for audits - No joints or pores for dirt and bacteria to collect – easy to clean for buyer, BSTI and GMP inspections.
- Tolerance to humid conditions - PU concrete is more tolerant of damp slabs and humid weather than many thin coatings.
- Long service life - A properly installed 3–4 mm PU concrete floor typically lasts 10–20 years.
Benefits of PU Flooring for Factories in Bangladesh
Bangladesh factories run long shifts in hot, humid conditions with frequent wet cleaning. A PU floor is designed for exactly that environment – here is what it delivers on site.
Heavy Traffic & Impact
Takes forklift, trolley and pallet-jack traffic and the impact of dropped tools and parts without dusting or cracking.
Hot Water & Thermal Shock
Suited to hot-water wash-down, steam cleaning and areas next to ovens, fryers, boilers and freezers, where epoxy is more likely to crack or lose adhesion.
Chemical & Food Resistance
Protects concrete from food acids, milk, oils, sugar syrups, dyes, detergents and many process chemicals used in Bangladeshi plants.
Seamless & Hygienic
A joint-free surface with coved skirting options leaves nowhere for dirt, water or bacteria to collect, supporting food-safety and GMP cleaning routines.
Slip-Resistant Finish
Textured PU concrete gives grip in wet, oily and washdown areas. See our anti-slip flooring options.
10–20 Year Service Life
With correct surface preparation, the right thickness and routine cleaning, a PU concrete floor gives many years of service before any recoating.
PU Flooring Price in Bangladesh (2026)
Approximate DPF prices per square foot for supply and application, including surface preparation, primer and installation by our team.
| PU flooring system | Thickness | Best for | Approx. price |
|---|---|---|---|
| Ducrete MF PU concrete | 3 mm | Garment, automobile, warehouses, general production | ৳140 / sq ft |
| Ducrete MF PU concrete | 4 mm | Food & beverage, wet areas, hot-water wash-down, heavy traffic | ৳180 / sq ft |
| PU floor coating (self-smoothing) | 2–3 mm | Pharma, labs, clean rooms, light–medium traffic | ৳160–180 / sq ft |
| Ducrete UD 200 extra heavy-duty PU concrete | 6 mm | Loading docks, heavy engineering, severe impact and thermal shock | ৳200 / sq ft |
| Ducrete UD 200 extra heavy-duty PU concrete | 12 mm | Extreme loads, impact and thermal shock, chemical plants | ৳400 / sq ft |
| Ducrete MF material only | 20 kg set | Contractors and maintenance teams | about ৳5,000 / set |
Prices are approximate and change with raw-material and shipping costs. Your final price is confirmed after a free site inspection. For a detailed cost breakdown, see our PU flooring price in Bangladesh guide.
PU Flooring Thickness Guide
Choosing the right thickness is the most important decision for a long-lasting PU floor in Bangladesh.
| Thickness | System | Typical areas | Traffic & exposure |
|---|---|---|---|
| 2–3 mm | PU floor coating (self-smoothing) | Pharma, labs, electronics assembly, clean rooms | Light to medium traffic, dry or occasionally wet |
| 3 mm | Ducrete MF PU concrete | Garment and textile halls, automobile plants, warehouses | Medium to heavy traffic, regular cleaning |
| 4 mm | Ducrete MF PU concrete | Dairy, beverage, bakery, meat and fish plants, washing and dyeing, cold stores, loading bays | Heavy traffic, hot-water wash-down, thermal shock |
| 6–12 mm | Ducrete UD 200 extra heavy-duty PU concrete | Loading docks, heavy engineering, dairy and meat processing, chemical plants | Severe impact, very heavy loads, extreme thermal shock and aggressive chemicals |
PU vs Epoxy Flooring in Bangladesh
Both are seamless resin floors, but they suit different conditions.
| Factor | PU concrete (Ducrete MF) | Epoxy flooring |
|---|---|---|
| Hot water and steam cleaning | Very good | Limited |
| Thermal shock (hot–cold) | Very good | Can crack or debond |
| Damp or humid slabs | More tolerant | Needs a dry slab |
| Finish | Matt, slightly textured | Smooth, glossy |
| Typical thickness | 3–4 mm | 0.3–3 mm |
| Approx. price | ৳140–180 / sq ft | ৳60–80 (coating) to about ৳200 (3 mm self-leveling) |
| Best for | Food, beverage, pharma wet areas, washing plants, cold stores | Dry production, warehouses, offices, showrooms |
Read the full comparison: PU flooring vs epoxy flooring, or see epoxy flooring in Bangladesh.
PU Flooring Maintenance Tips
Simple daily care keeps a PU floor looking good and performing for years.
- Sweep or scrub daily and wash with a neutral or mildly alkaline cleaner.
- Clean up oils, acids and dye spills promptly, even though the floor resists them.
- Use soft rubber wheels on trolleys and avoid dragging steel pallets.
- Keep floor drains clear so water does not stand on the surface.
- Inspect edges, drains and joints once a year and repair small damage early.
DPF PU Flooring Systems – Made in Bangladesh
How We Install PU Flooring in Bangladesh
Most PU floor failures in Bangladesh come from poor preparation, not poor material. Every DPF project follows the same six controlled steps, with our own application team on site.

1. Free Site Inspection
Our engineer checks concrete strength, moisture, cracks, drainage, traffic and the chemicals and temperatures the floor will face, then recommends the system and thickness.

2. Surface Preparation
The slab is diamond-ground or shot-blasted to remove laitance, oil and old coatings and to open the concrete for a strong mechanical bond.

3. Crack & Joint Repair
Cracks, holes and damaged joints are repaired, and anchor grooves are cut at edges and drains so the PU layer locks into the slab.

4. Primer
A primer suited to the moisture reading is applied to seal the concrete and build adhesion before the body coat.

5. Ducrete MF Application
The resin, hardener and aggregate are machine-mixed and laid to the specified 3–4 mm thickness, with coving at walls where hygiene requires it.

6. Curing, Inspection & Handover
The floor cures before light traffic and is checked for thickness and finish. Light traffic is usually possible after about 12–20 hours; full use follows after curing.
PU Flooring Projects in Bangladesh
Real factory floors installed by DPF with Ducrete MF PU concrete. Click a project to read the full case study.
About 15,900 sq ft of 3 mm Ducrete MF in an automotive plant in Babanipur, Gazipur – completed April 2025.
About 9,000 sq ft of 4 mm heavy-duty Ducrete MF for a machinery and vehicle production floor in Sreepur, Gazipur.
About 40,000 sq ft of Ducrete MF PU concrete across a textile plant in Araihazar, Narayanganj – completed July 2024.
Where PU Flooring Is Used in Bangladesh
PU flooring suits any Bangladeshi facility where floors get wet, hot, oily or heavily used. These are the sectors where we install it most often.

Pharmaceuticals & Labs
Seamless, cleanable PU floors for tablet, liquid and packaging areas that need GMP-style cleaning and chemical resistance.
Pharmaceutical Flooring

Food & Beverage Plants
Thermal-shock-resistant PU concrete for dairies, bakeries, beverage lines, meat, fish and frozen-food plants with daily hot-water cleaning.
Food Grade PU Flooring

Hospitals & Warehouses
Hygienic, dust-free floors for hospital service areas and warehouses with forklift and pallet traffic.
Hospital & Warehouse Flooring

Garments & Textile Mills
PU concrete for washing, dyeing and finishing sections that face water, dyes and chemicals, and durable floors for production halls.
Garments & Textile Flooring

Manufacturing Plants
Heavy-duty PU floors for automobile, machinery, packaging and chemical plants exposed to oils, fuels and impact.
Industrial Flooring

Heavy-Duty & Cold-Store Areas
4 mm Ducrete MF for loading bays, cold stores and freezer rooms where heavy loads and temperature changes meet.
Heavy-Duty PU Flooring
What Affects PU Flooring Cost in Bangladesh?
Two factories of the same size can pay different prices for a PU floor. The main factors are listed below.
We give a fixed written quotation after inspecting your floor, so there are no surprises once work begins.
- Thickness and system: 3 mm, 4 mm or a self-smoothing PU coating
- Concrete condition: repairs, old coatings and moisture levels
- Area and access: project size, phasing and working hours
- Details: coving, drains, line marking and anti-slip texture



Why Choose DPF for PU Flooring in Bangladesh
DPF is a PU flooring manufacturer and installer in one company, so you get the right material, correctly applied, with a single point of responsibility.
Local Manufacturer
Ducrete MF is produced at our own plant in Kaliganj, Gazipur, so material is available quickly anywhere in Bangladesh.
Own Application Team
Our trained crews prepare and install every floor, so quality is not left to unknown subcontractors.
Proven on Real Projects
From Suzuki Rancon and ACI Motors to Mithela Textile, our PU floors are in daily use in Bangladeshi factories.
Clear Pricing & Free Inspection
Transparent per-sq-ft prices, a free site inspection and technical advice before you commit.
PU Flooring Across Bangladesh
We install PU flooring in Dhaka, Gazipur, Narayanganj, Chattogram, Savar, Ashulia, Mymensingh and other industrial areas of Bangladesh.
Serving All of Bangladesh
Our plant in Gazipur supplies material across the country, and our application team travels to your site. Call 01711-037659 to book a free inspection.
PU Flooring in Bangladesh – Frequently Asked Questions
1. What is the price of PU flooring in Bangladesh?
DPF supplies and applies Ducrete MF PU concrete for about ৳140 per sq ft at 3 mm and ৳180 per sq ft at 4 mm. A self-smoothing PU floor coating (2–3 mm) costs about ৳160–180 per sq ft. Extra heavy-duty Ducrete UD 200 costs about ৳200 per sq ft at 6 mm and ৳400 per sq ft at 12 mm. Material only, a 20 kg Ducrete MF set costs about ৳5,000. Prices change with raw-material and shipping costs and are confirmed after a free site inspection.
2. Is PU flooring better than epoxy for factories in Bangladesh?
For wet, hot or food areas, yes. PU concrete handles hot-water wash-down, steam cleaning and thermal shock much better than epoxy and is more tolerant of humid conditions. Epoxy is a good, lower-cost choice for dry production halls, warehouses and offices where a smooth, glossy finish is wanted. See PU vs epoxy flooring.
3. How long does PU flooring last?
A properly prepared and installed 3–4 mm PU concrete floor typically lasts 10–20 years in Bangladeshi factory conditions, depending on traffic, chemicals and cleaning.
4. Is PU flooring suitable for food factories?
Yes. PU concrete is seamless, non-porous and resists food acids, fats and hot-water cleaning, which is why it is widely used in dairies, beverage plants, bakeries and frozen-food plants. Read our food grade PU flooring guide.
5. What thickness of PU flooring do I need?
3 mm Ducrete MF suits most garment, automobile and warehouse floors. 4 mm is recommended for wet processing, hot-water wash-down, cold stores and heavy loads. A 2–3 mm PU coating suits pharma, labs and light-traffic clean areas. For the most severe conditions – very heavy loads, impact and extreme thermal shock – we use Ducrete UD 200 at 6–12 mm.
6. How long does PU flooring installation take?
Most factory floors take a few days depending on area and concrete condition. Ducrete MF can usually take light traffic after about 12–20 hours, with full use after curing. Large plants can be done section by section so production continues.
7. Can PU flooring be applied over an old floor?
Often, yes. A sound concrete floor or well-bonded old coating can be ground and primed, and Ducrete MF laid on top. Loose or failed coatings are removed first. We confirm this during the site inspection.
8. Do you install PU flooring outside Dhaka?
Yes. We install PU flooring in Gazipur, Narayanganj, Chattogram, Savar, Ashulia, Mymensingh and other industrial areas across Bangladesh.
Free Site Inspection
PU Flooring in Bangladesh
Planning a new PU floor or replacing a failing one? Talk to a PU flooring manufacturer in Bangladesh.
Call 01711-037659 or email info@duconasia.com. Our engineer will inspect your floor, recommend the right system and give you a written quotation.



