Dupoxy SL ESD is the anti-static (ESD) version of DPF’s Dupoxy SL self-leveling epoxy. It gives a smooth, glossy, dust-free floor with controlled conductivity for electronics, data centres and clean rooms.


Product at a Glance
| Property | Dupoxy SL ESD |
|---|---|
| Type | 3-component conductive self-leveling epoxy |
| Pack | 20 kg set |
| Coverage | About 35–42 sq ft per set at 3 mm |
| Finish | Seamless, smooth, glossy |
| System designed to | IEC 61340-5-1 and ANSI/ESD S20.20 programmes |
| Approx. installed price | About ৳450–550 per sq ft (supply and application) |
The price depends on the materials, thickness, floor area and quantity, and changes with raw-material and shipping costs. Resistance targets are agreed before installation and confirmed by testing on site.
Benefits
- Static control – protects sensitive components and data equipment from electrostatic discharge.
- Clean-room finish – smooth, non-porous and easy to keep dust-free.
- Chemical resistance – resists common cleaning agents, oils and fuels.
- Bright, professional look – available in a range of colours.
Where It Is Used
- Electronics and PCB assembly lines
- Server rooms and data centres
- Hospital operating theatres and ICUs
- Pharmaceutical clean rooms and laboratories
- Areas with explosion risk from flammable dust or solvents
Installation System
- Surface preparation – diamond grinding or shot blasting, then crack and joint repair.
- Primer – a primer to seal the concrete and build adhesion.
- Earthing grid – self-adhesive copper tape laid in a grid and connected to the building earth points.
- Conductive primer – links the copper grid to the floor surface.
- Conductive body coat – the ESD floor layer applied to the specified thickness.
- Testing and handover – resistance readings taken across the floor before handover.

For wet or heavy-use ESD areas, see Ducrete MF Conductive PU concrete, or read our ESD flooring guide.
Frequently Asked Questions
What is Dupoxy SL ESD?
It is DPF’s anti-static self-leveling epoxy floor – a 3-component epoxy with a conductive system that carries static charge safely to earth.
How much does ESD epoxy flooring cost in Bangladesh?
Installed ESD epoxy floors cost about ৳450–550 per sq ft, depending on the materials, thickness, floor area and quantity. The price is confirmed after a free site inspection.
Where should I use ESD epoxy instead of ESD PU?
Dupoxy SL ESD suits dry, clean areas such as electronics assembly, server rooms and labs. For wet or hot wash-down areas choose Ducrete MF Conductive.
Do you test the floor after installation?
Yes. Resistance is measured across the floor before handover so you know it meets the agreed ESD targets.
Get a Quotation
Call 01711-037659 or email info@duconasia.com for technical data, a free site inspection and a written quotation. See also all DPF products.
