Ducrete MF Conductive is the conductive (ESD) version of DPF’s Ducrete MF PU concrete. It combines the toughness, hot-water and chemical resistance of polyurethane concrete with a controlled electrical path to earth, protecting sensitive electronics and reducing spark risk.


Product at a Glance
| Property | Ducrete MF Conductive |
|---|---|
| Type | 4-component conductive polyurethane concrete |
| Pack | 20 kg set |
| Coverage | About 38–45 sq ft per set at 3 mm |
| Finish | Seamless, matt, slip resistant |
| System designed to | IEC 61340-5-1 and ANSI/ESD S20.20 programmes |
| Approx. installed price | About ৳450–550 per sq ft (supply and application) |
The price depends on the materials, thickness, floor area and quantity, and changes with raw-material and shipping costs. Exact resistance targets are agreed with you before installation and confirmed by testing on site.
Why Choose a Conductive PU Floor?
- Static control – safely drains static charge from people, trolleys and equipment to earth.
- PU toughness – handles trolley traffic, impact and wet cleaning better than thin ESD coatings.
- Thermal shock and chemical resistance – suits wash-down areas where epoxy ESD floors struggle.
- Seamless and hygienic – no joints for dust to collect in clean environments.
Where It Is Used
- Electronics and PCB assembly lines
- Server rooms and data centres
- Hospital operating theatres and ICUs
- Pharmaceutical clean rooms and laboratories
- Areas with explosion risk from flammable dust or solvents
Installation System
- Surface preparation – diamond grinding or shot blasting, then crack and joint repair.
- Primer – a primer to seal the concrete and build adhesion.
- Earthing grid – self-adhesive copper tape laid in a grid and connected to the building earth points.
- Conductive primer – links the copper grid to the floor surface.
- Conductive body coat – the ESD floor layer applied to the specified thickness.
- Testing and handover – resistance readings taken across the floor before handover.

Ducrete MF Conductive vs Dupoxy SL ESD
| Ducrete MF Conductive | Dupoxy SL ESD | |
|---|---|---|
| Base | PU concrete | Self-leveling epoxy |
| Finish | Matt | Smooth, glossy |
| Hot-water wash-down | Very good | Limited |
| Best for | Wet or heavy-use ESD areas | Dry clean rooms and electronics halls |
See Dupoxy SL ESD and our ESD flooring guide.
Frequently Asked Questions
What is Ducrete MF Conductive?
It is DPF’s conductive polyurethane concrete floor – a 4-component PU concrete with a conductive system that carries static charge safely to earth.
How much does conductive PU flooring cost in Bangladesh?
Installed ESD floors cost about ৳450–550 per sq ft, depending on the materials, thickness, floor area and quantity. The price is confirmed after a free site inspection.
Which standards does the system follow?
DPF ESD floors are designed for use within IEC 61340-5-1 and ANSI/ESD S20.20 static-control programmes. Resistance is tested on site before handover.
Is it suitable for wet areas?
Yes. As a PU concrete, it tolerates hot-water cleaning and thermal shock better than epoxy ESD coatings.
Get a Quotation
Call 01711-037659 or email info@duconasia.com for technical data, a free site inspection and a written quotation. See also all DPF products.

