Home > Epoxy Flooring in Bangladesh
Epoxy Flooring in Bangladesh
Seamless, hard-wearing epoxy floors for factories, warehouses, pharma units, car parks and showrooms across Bangladesh – made at our own plant in Gazipur and installed by our own team, from about ৳60 per sq ft.





What Is Epoxy Flooring and Why Do Bangladeshi Factories Choose It?
Epoxy flooring is a resin floor made by mixing epoxy resin with a hardener and applying it over concrete – from a thin 200–300 micron roller coat up to a 2–6 mm self-leveling or mortar system. Once cured it forms a hard, seamless surface bonded to the slab. In Bangladesh it is widely used in pharmaceutical units, electronics and garment factories, warehouses, hospitals, car parks and showrooms, because it stops concrete dusting, resists oil and chemicals and is easy to clean. DPF's main system is Dupoxy SL, a self-leveling epoxy resin floor made at our plant in Gazipur.
Factory owners in Bangladesh choose epoxy flooring for these reasons:
- Dust-free concrete - Seals the slab so it stops dusting, protecting products, machines and finished goods.
- Chemical and oil resistance - Resists oils, fuels, common acids, alkalis and cleaning chemicals.
- Easy cleaning - A smooth surface that cleans quickly with a mop or scrubber.
- Hygiene for audits - No joints or pores for dirt and bacteria to collect – helps with buyer, BSTI and GMP inspections.
- Bright, professional look - Light-reflecting colours brighten production halls and support safety line marking.
- Long service life - A properly installed self-leveling epoxy floor lasts many years under normal factory traffic.
Benefits of Epoxy Flooring for Factories in Bangladesh
Bangladeshi factories need floors that stay clean, bright and dust-free through long shifts. A well-installed epoxy floor delivers that on site.
Hard-Wearing Surface
Takes trolley, pallet-jack and forklift traffic in production halls and warehouses without dusting or wearing through.
Chemical & Oil Resistance
Protects concrete from oils, fuels, solvents, dyes and many process chemicals used in Bangladeshi plants.
Dust-Free & Clean
Seals the concrete so no dust rises from the floor, protecting electronics, medicines, garments and packed goods.
Seamless & Hygienic
A joint-free, non-porous surface leaves nowhere for dirt or bacteria to collect, supporting GMP and buyer audits.
Anti-Slip Options
A textured or sand-broadcast finish adds grip on ramps, walkways and areas that sometimes get wet.
Colours & Decorative Finishes
Choose standard colours with safety line marking, or metallic and 3D epoxy finishes for offices, showrooms and homes.
Epoxy Flooring Price in Bangladesh (2026)
Approximate DPF prices per square foot for supply and installation, including surface preparation, primer and application by our team.
| Epoxy flooring system | Thickness | Best for | Approx. price |
|---|---|---|---|
| Epoxy roller coat | 200–300 micron | Stores, offices, light-traffic areas | ৳60–80 / sq ft |
| Dupoxy SL self-leveling epoxy | 3 mm | Pharma, electronics, garments, clean rooms, warehouses | ৳200 / sq ft |
| Epoxy mortar / screed | 4–6 mm | Heavy-duty production floors | ৳230–250 / sq ft |
| ESD / anti-static epoxy | 2 mm | Electronics, server rooms, labs | ৳350 / sq ft |
| Metallic epoxy | Decorative | Showrooms, offices, homes | ৳400–450 / sq ft |
| 3D epoxy – material only | 2 mm | Decorative floors | about ৳1,000 / kg (≈ ৳167 / sq ft material) |
Prices are approximate and change with raw-material and shipping costs. Your final price is confirmed after a free site inspection. For a detailed cost breakdown, see our epoxy flooring price in Bangladesh guide.
Epoxy Flooring Thickness Guide
Choosing the right thickness is the most important decision for a long-lasting epoxy floor in Bangladesh.
| Thickness | System | Typical areas | Traffic & exposure |
|---|---|---|---|
| 200–300 micron | Epoxy roller coat | Stores, offices, packing areas | Foot traffic, light trolleys |
| 1–2 mm | Thin self-leveling / ESD epoxy | Electronics, server rooms, labs | Light to medium traffic |
| 2–3 mm | Dupoxy SL self-leveling epoxy | Pharma, garments, clean rooms, warehouses | Medium traffic, trolleys, pallet jacks |
| 4–6 mm | Epoxy mortar / screed | Heavy engineering, loading areas | Heavy forklift traffic and impact |
Epoxy vs PU Flooring in Bangladesh
Both are seamless resin floors, but they suit different conditions. Here is how to choose.
| Factor | Epoxy flooring (Dupoxy SL) | PU concrete (Ducrete MF) |
|---|---|---|
| Best for | Dry production, pharma, electronics, warehouses, showrooms | Wet, hot and food-processing areas |
| Hot water & steam cleaning | Not recommended | Excellent |
| Thermal shock | Limited | Excellent |
| Finish | Smooth and glossy, decorative options | Textured, matt |
| Approx. price | from ৳60 / sq ft (roller coat), ৳200 / sq ft (3 mm) | from ৳140 / sq ft |
Not sure which suits your floor? Read our epoxy vs PU flooring comparison or see PU flooring in Bangladesh.
Epoxy Flooring Maintenance Tips
Simple daily care keeps an epoxy floor glossy and long-lasting.
- Sweep daily and mop with a neutral cleaner; avoid strong acid cleaners.
- Wipe up oil, fuel and chemical spills promptly.
- Place mats at entrances so grit does not scratch the surface.
- Use soft rubber wheels on trolleys and do not drag steel pallets or machines.
- Inspect busy areas once a year and recoat worn spots early.
DPF Epoxy Flooring Systems – Made in Bangladesh
How We Install Epoxy Flooring in Bangladesh
Most epoxy floor failures in Bangladesh come from poor surface preparation or damp concrete. Our six-step process prevents both.

1. Free Site Inspection
Our engineer checks concrete strength, moisture, cracks, levels and traffic, then recommends the right epoxy system and thickness.

2. Surface Preparation
The slab is diamond-ground or shot-blasted to remove laitance, old coatings and contamination so the epoxy bonds properly.

3. Crack & Joint Repair
Cracks, holes and damaged joints are repaired, and low spots are levelled with epoxy mortar.

4. Primer
An epoxy primer suited to the moisture reading is applied to seal the concrete and give a strong bond.

5. Dupoxy SL Application
Resin and hardener are mixed in the correct ratio, spread to the specified thickness and rolled to release air for a smooth, glossy finish.

6. Curing, Inspection & Handover
The floor cures before traffic – usually about 24 hours for foot traffic and about 7 days for full load – then it is checked and handed over.
Epoxy Flooring Projects in Bangladesh
Real floors and walls completed with DPF epoxy systems – including about 250,000 sq ft of epoxy wall coating for ACME Laboratories in Dhamrai, plus floors for United Hospital, Akij Essential, Parkview Hospital Chattogram and Bashundhara Gold Refinery.
About 58,000 sq ft of seamless, easy-clean epoxy flooring for wards, corridors and clinical areas.
About 20,000 sq ft of self-leveling epoxy, plus later 1 mm epoxy coating for production areas.
Where Epoxy Flooring Is Used in Bangladesh
Epoxy flooring suits any Bangladeshi facility that needs a clean, dust-free and hard-wearing floor.

Pharmaceuticals & Labs
Seamless, dust-free epoxy floors for tablet, liquid and packing sections and QC labs.
Pharmaceutical Flooring

Food Packaging & Dry Areas
Hygienic epoxy floors for packing halls, dry stores and areas without hot-water wash-down.
Food Grade Flooring

Hospitals & Clean Rooms
Easy-clean, hygienic epoxy floors for wards, operation theatres, corridors and labs.
Hospital Flooring

Garments & Textile Mills
Bright, dust-free epoxy floors for sewing, cutting, finishing and washing sections.
Garments & Textile Flooring

Warehouses & Factories
Hard-wearing epoxy floors for warehouses, electronics plants and general production halls.
Industrial Flooring

Car Parks & Basements
Epoxy car park coating with line marking for basements and parking decks.
Car Parking Epoxy
What Affects Epoxy Flooring Cost in Bangladesh?
Two factories of the same size can pay different prices for an epoxy floor. These are the main factors:
We give a fixed written quotation after inspecting your floor, so there are no surprises once work begins.
- Thickness and system: roller coat, 3 mm self-leveling or 4–6 mm mortar.
- Concrete condition: repairs, moisture and old coatings that need removing.
- Area and access: project size, site location and working hours.
- Details: colours, line marking, anti-slip texture and decorative finishes.



Why Choose DPF for Epoxy Flooring in Bangladesh
DPF is an epoxy flooring manufacturer and installer in Bangladesh. We make Dupoxy SL at our own plant in Gazipur and install it with our own trained team.
Local Manufacturer
Dupoxy SL is made at our plant in Gazipur, so material is fresh, in stock and fairly priced.
Own Application Team
Our trained crews prepare and apply every epoxy floor, so quality is controlled from grinding to handover.
Proven on Real Projects
From 250,000 sq ft of epoxy wall coating at ACME Laboratories to floors for Bashundhara Eye Hospital, United Hospital, Aristo Pharma and Akij Essential, our epoxy systems are proven across Bangladesh.
Clear Pricing & Free Inspection
Transparent per-sq-ft prices, a free site inspection and a written quotation before work starts.
Epoxy Flooring Across Bangladesh
We install epoxy flooring in Dhaka, Gazipur, Narayanganj, Chattogram and other industrial areas.
Serving All of Bangladesh
Our plant in Gazipur supplies epoxy material across the country, with installation teams for factories nationwide.
Epoxy Flooring in Bangladesh – Frequently Asked Questions
1. What is the price of epoxy flooring in Bangladesh?
About ৳60–80 per sq ft for an epoxy roller coat, about ৳200 per sq ft for 3 mm Dupoxy SL self-leveling epoxy and ৳230–250 per sq ft for 4–6 mm epoxy mortar, including installation. Prices are approximate and change with raw-material and shipping costs.
2. Is epoxy or PU flooring better for my factory?
Epoxy suits dry areas such as pharma, electronics, garments, warehouses and showrooms. For hot-water wash-down, steam or thermal shock, PU concrete is the better choice.
3. How long does epoxy flooring last?
A properly installed self-leveling epoxy floor lasts many years under normal factory traffic. A thin roller coat needs recoating sooner in busy areas.
4. Is epoxy flooring suitable for pharmaceutical factories?
Yes. Epoxy is seamless, dust-free and easy to clean, which supports GMP requirements in tablet, liquid and packing sections.
5. What thickness of epoxy flooring do I need?
A roller coat suits light traffic, 2–3 mm Dupoxy SL suits most pharma, garment and warehouse floors, and 4–6 mm epoxy mortar suits heavy forklift areas.
6. How long does epoxy flooring installation take?
Most factory floors take a few days, depending on area and preparation. The floor takes foot traffic after about 24 hours and full load after about 7 days.
7. Can epoxy flooring be applied over an old floor?
Often, yes. A sound concrete or old epoxy floor can be ground and recoated; loose tiles or failed coatings must be removed first.
8. Do you install epoxy flooring outside Dhaka?
Yes. We install epoxy flooring in Gazipur, Narayanganj, Chattogram and across Bangladesh, and supply material nationwide.
Free Site Inspection
Epoxy Flooring in Bangladesh
Planning a new epoxy floor or repairing an old one? Book a free site inspection and get a written quotation.
Call 01711-037659 or email info@duconasia.com. Our engineer will inspect your floor, recommend the right system and give you a written quotation.

