Polyurea Flooring in BD

DPF Polyurea – Spray Polyurea Coating

DPF Polyurea is a fast-curing, spray-applied polyurea coating for waterproofing and heavy-duty protection. Sprayed hot with a plural-component machine, it gels in seconds to form a seamless, highly elastic, chemical-resistant membrane – so roofs, car parks, tanks and floors can go back into service the same day.

Polyurea floor coating in a warehouse in Bangladesh
Polyurea floor coating in a warehouse in Bangladesh
DPF two-component polyurea kit
DPF two-component polyurea kit

Why Choose Spray Polyurea?

  • Cures in seconds – minimum downtime; areas return to use within hours.
  • Seamless and waterproof – one continuous membrane with no joints or laps.
  • Highly elastic – stretches several times its length and bridges hairline cracks.
  • Tough – high tear and abrasion resistance for traffic and impact.
  • Chemical resistant – withstands many acids, alkalis, fuels and salts.
  • Solvent-free – 100% solids, no shrinkage.

Typical Technical Data

PropertyTypical value
TypeTwo-component, 100% solids aromatic polyurea
Mix ratio1 : 1 by volume
ApplicationPlural-component hot spray, about 70–80 °C, 150–200 bar
Gel timeabout 3–5 seconds
Tack-freeabout 5–10 seconds
Foot trafficafter about 2 hours
Vehicle trafficafter about 12–24 hours
Tensile strength> 20 MPa
Elongation at breakabout 300–350%
Tear strength> 50 N/mm
HardnessShore D about 50–55
Adhesion to concrete> 2.5 N/mm² with primer (concrete failure)
Service temperatureabout −20 °C to +90 °C
Typical thickness1.5–3 mm (2 mm most common)
Consumptionabout 1.1–1.3 kg/m² per mm

Values are typical for spray polyurea of this type and are given for guidance. Project specifications are confirmed with DPF’s technical data sheet and site conditions.

Applications

  • Roof, terrace and podium waterproofing
  • Car park decks, ramps and basements
  • Water tanks, reservoirs and wastewater (ETP) structures
  • Chemical bunds and secondary containment
  • Industrial floors, loading areas and truck beds
  • Bridge decks, pipes and steel protection

Application System

  1. Surface preparation – grinding or shot blasting; concrete must be sound and dry (moisture below about 4%).
  2. Repairs – cracks, joints and holes repaired.
  3. Primer – a suitable primer for concrete or steel.
  4. Spray application – DPF Polyurea sprayed in crossing passes to the specified thickness.
  5. Anti-slip and topcoat – optional aggregate broadcast and UV-stable topcoat for exposed or traffic areas.

Polyurea vs Polyaspartic vs PU Concrete

DPF PolyureaPolyasparticDucrete MF PU concrete
ApplicationHot spray machineRoller / squeegeeTrowel
CureSecondsHours12–20 h
FlexibilityVery highMediumLow
Best forWaterproofing, tanks, decksUV-stable floor topcoatFood, wet and heavy-duty factory floors

See also polyaspartic flooring, Ducrete MF and car parking flooring.

Frequently Asked Questions

What is spray polyurea?

Spray polyurea is a two-component, solvent-free elastomer applied hot with a high-pressure plural-component machine. It gels in a few seconds and forms a seamless, flexible, waterproof membrane.

How fast can DPF Polyurea be used?

It gels in about 3–5 seconds and is touch-dry in seconds. Foot traffic is typically possible after about 2 hours and vehicle traffic after about 12–24 hours, depending on temperature.

Where is DPF Polyurea used?

Roof and terrace waterproofing, car park decks and ramps, water and wastewater tanks, chemical bunds, industrial floors, bridge decks and steel or concrete protection.

What is the difference between polyurea and polyaspartic?

Spray polyurea is applied by hot-spray machine, cures in seconds and is very elastic – ideal for waterproofing. Polyaspartic is roller-applied, cures in hours and is used mainly as a UV-stable floor topcoat.

How much does DPF Polyurea cost?

The price depends on thickness, surface preparation, area and access. Call 01711-037659 for a quotation after a free site inspection.

Get a Quotation

Call 01711-037659 or email info@duconasia.com for a free site inspection and quotation.

Wait a moment

DPF Support
Online
Scroll to Top