Epoxy & PU Flooring in Narayanganj

DPF supplies and installs industrial epoxy and PU flooring for factories in Narayanganj, including Fatullah, Siddhirganj, Kanchpur, Rupganj and Sonargaon, from our factory in Gazipur.

Floors for Knitwear, Dyeing and Process Plants

Narayanganj is known for knitwear, dyeing and finishing, as well as food, cement and other process industries. Dyeing and washing areas see hot water, chemicals and constant wet cleaning – conditions where ordinary epoxy can crack or lose bond. For these zones we recommend Ducrete MF PU concrete, while dry areas such as cutting, sewing, packing and storage are well served by Dupoxy SL self-leveling epoxy.

Flooring Systems We Install

How We Work

  1. Site visit and slab assessment
  2. Written proposal with system, thickness and price per sq ft
  3. Surface preparation by grinding or shot blasting
  4. Priming, application and finishing by our own team
  5. Handover with care and cleaning guidance

Common Floor Problems in Narayanganj Plants

Knitwear, dyeing and finishing plants in Narayanganj put floors under heavy stress. Hot dye liquor, caustic and bleaching chemicals, and constant hose-down cleaning attack plain concrete and thin coatings, leading to pitting, standing water, slippery surfaces and peeling. In older buildings near the river, damp slabs add to the problem. The answer is a properly prepared substrate, correct falls to the drains, and a floor system chosen for the real exposure in each zone.

Recommended System by Area

AreaRecommended systemWhy
Dyeing and finishing floorsDucrete MF PU concreteResists hot water, chemicals and thermal shock
Knitting and sewing hallsDupoxy SL self-leveling epoxySeamless, dust-free and easy to clean
Chemical storesDucrete MF PU concreteBetter chemical resistance than standard epoxy
Finished-goods and packing areasEpoxy with line markingClean surface and clear walkways
Food and cement plant offices and labsDupoxy SL self-leveling epoxySmooth, hygienic and attractive finish

Ducrete MF PU concrete flooring in a wet production area with drains in Bangladesh

Ducrete MF PU concrete laid to drains in a wet production area.

Approximate Cost in Narayanganj

Indicative prices (supply and application): Dupoxy SL self-leveling epoxy about ৳200 per sq ft for 3 mm, Ducrete MF PU concrete about ৳140–180 per sq ft for 3–4 mm, and epoxy roller coats from about ৳60–80 per sq ft. Prices change with raw-material and shipping costs and are confirmed after a site inspection. See the full epoxy price guide and PU price guide.

Areas We Cover in Narayanganj

We work across Narayanganj’s industrial belt, including Fatullah, Siddhirganj, Kanchpur, Rupganj, Sonargaon, Araihazar, Bandar and Adamjee EPZ. Narayanganj is home to many knitwear, dyeing and finishing plants, jute and textile mills, food factories and riverside warehouses, and each needs a floor matched to its process.

Why Narayanganj Plants Choose DPF

  • Own factory nearby in Gazipur, so material and team reach Narayanganj quickly.
  • Floors for wet processing – PU concrete that handles hot water, dyes and chemicals.
  • Work around production – we can phase work section by section to keep your plant running.
  • Clear pricing after a free site inspection.

Project Photos

Ducrete MF PU concrete flooring in a wet production area with drains in Bangladesh
PU floor in a wet area with drains
Yellow Dupoxy SL epoxy floor in a garment washing plant in Bangladesh
Epoxy floor in a garment washing plant
Beige Ducrete MF PU flooring in a large factory floor in Bangladesh
PU concrete floor in a large factory

Our Installation Process in Narayanganj

  1. Free site inspection – we check the concrete, moisture, traffic and chemicals on your floor.
  2. Proposal and quotation – the recommended system for each area, thickness, price and timeline.
  3. Surface preparation – grinding or shot blasting, crack and joint repair.
  4. Primer and body coats applied by our own trained team, with material from our Gazipur plant.
  5. Finishing and handover – topcoat, line marking and curing before the floor goes back into use.

Frequently Asked Questions

What is the best floor for a dyeing factory?

PU concrete such as Ducrete MF. It tolerates hot water up to about 70°C (up to 90°C in the 5–6 mm system), chemicals and daily washdown far better than standard epoxy.

Can you coat over an old, damaged floor?

In most cases yes, after the old surface is ground or shot-blasted, cracks and joints are repaired and the slab is checked for moisture.

Do you cover Fatullah, Siddhirganj and Kanchpur?

Yes. We serve all industrial areas of Narayanganj, including Fatullah, Siddhirganj, Kanchpur, Rupganj and Sonargaon.

How long before the floor can be used?

Foot traffic is usually possible within about 24 hours. Heavy traffic and chemical exposure need longer cure times, which we plan into the schedule.

Do you offer anti-slip flooring for dyeing and washing sections?

Yes. Ducrete MF PU concrete gives a textured, slip-resistant surface for wet areas. See our anti-slip flooring page.

Do you work in Adamjee EPZ?

Yes. We work in Adamjee EPZ and the surrounding industrial areas of Narayanganj.

Free Site Inspection in Narayanganj

Our technical team visits your site, checks the concrete, measures moisture and recommends the right system with a written quotation. Call 01711-037659, email info@duconasia.com or use the contact form.

Related: Epoxy flooring · PU flooring · Epoxy flooring price · PU flooring price · Projects

Related Services

Wait a moment

DPF Support
Online
Scroll to Top