Epoxy & PU Flooring in Gazipur

Ducon Polymer Flooring (DPF) manufactures its epoxy and PU flooring systems at its own factory in Kaliganj, Gazipur. For factories in Gazipur this means short travel times, quick site inspections and material supplied directly from our plant.

Industrial Flooring for Gazipur Factories

Gazipur is one of the busiest industrial districts in Bangladesh, with garment and knitwear factories, washing and dyeing plants, food and beverage units, pharmaceutical plants and large warehouses across Tongi, Board Bazar, Konabari, Kashimpur, Kaliakair, Sreepur and Mawna. Each of these needs a different floor: dust-free and easy to clean in garment cutting and sewing halls, chemical- and water-resistant in washing plants, and hygienic and seamless in food and pharma areas.

We have installed Ducrete MF PU flooring in a factory in Mawna, Gazipur – see it on our projects page.

Flooring Systems We Install

Why Factories in Gazipur Choose DPF

  • Own manufacturing plant in Kaliganj, Gazipur
  • In-house application team and technical support
  • Proper surface preparation by grinding or shot blasting before every job
  • Systems for both dry areas (epoxy) and wet or hot areas (PU concrete)

Common Floor Problems in Gazipur Factories

Many factory floors in Gazipur were built quickly as production expanded, and the same problems come up again and again: dusting concrete that settles on fabric and finished goods, cracked and broken joints under trolley wheels, oil-soaked areas around machines, and peeling paint-type coatings in washing sections. Low-lying sites also see rising damp in the rainy season, which makes cheap coatings blister. A lasting repair starts with mechanical surface preparation, crack and joint repair, and choosing a system that suits the exposure in each area.

Recommended System by Area

AreaRecommended systemWhy
Cutting, sewing and finishing hallsDupoxy SL self-leveling epoxyDust-free, seamless and easy to sweep
Washing and dyeing sectionsDucrete MF PU concreteHandles hot water, chemicals and constant wet cleaning
Food and beverage unitsDucrete MF PU concreteHygienic and resistant to food acids and thermal shock
Warehouses and loading areasEpoxy with line markingAbrasion resistance and clear forklift aisles
Pharma and lab roomsDupoxy SL self-leveling epoxyNon-porous surface that supports GMP cleaning

Grey Ducrete MF PU flooring in a factory in Mawna, Bangladesh

Ducrete MF PU flooring in a factory in Mawna, Gazipur.

Approximate Cost in Gazipur

Indicative prices (supply and application): Dupoxy SL self-leveling epoxy about ৳200 per sq ft for 3 mm, Ducrete MF PU concrete about ৳140–180 per sq ft for 3–4 mm, and epoxy roller coats from about ৳60–80 per sq ft. Prices change with raw-material and shipping costs and are confirmed after a site inspection. See the full epoxy price guide and PU price guide.

Why Gazipur Factories Choose DPF

  • Local manufacturer – our plant is in Kaliganj, Gazipur, so material reaches your site the same day.
  • Fast site visits across Tongi, Board Bazar, Konabari, Kashimpur, Kaliakair, Sreepur and Mawna.
  • One company from inspection to handover – we make the material and apply it with our own team.
  • Experience with RMG compliance – dust-free, cleanable floors that support buyer audits.

Project Photos

Yellow Dupoxy SL epoxy floor in a garment washing plant in Bangladesh
Epoxy floor in a garment washing plant
Green Ducrete MF food grade PU flooring in a beverage plant in Bangladesh
Food-grade PU floor in a beverage plant
Applying Dupoxy SL self-leveling epoxy floor coating in a factory in Bangladesh
Self-leveling epoxy application

Our Installation Process in Gazipur

  1. Free site inspection – we check the concrete, moisture, traffic and chemicals on your floor.
  2. Proposal and quotation – the recommended system for each area, thickness, price and timeline.
  3. Surface preparation – grinding or shot blasting, crack and joint repair.
  4. Primer and body coats applied by our own trained team, with material from our Gazipur plant.
  5. Finishing and handover – topcoat, line marking and curing before the floor goes back into use.

Frequently Asked Questions

Where is the DPF factory in Gazipur?

Our manufacturing plant is at 110 Golan Bazar, Kaliganj, Gazipur 1723. Material for Gazipur projects is supplied directly from this plant.

How quickly can you visit a factory in Gazipur?

Because our plant is in Gazipur, site visits in Tongi, Konabari, Kashimpur, Sreepur and Mawna can usually be arranged at short notice. Call 01711-037659 to book one.

Can you work while our factory is running?

Yes. We can coat one section or line at a time, or work on weekends and holidays, so production keeps going.

Which is better for a washing plant, epoxy or PU?

For washing and dyeing areas with hot water and chemicals, Ducrete MF PU concrete lasts longer than standard epoxy. Dry areas can use Dupoxy SL epoxy.

Do you supply Dutop 100 floor hardener in Gazipur?

Yes. Dutop 100 non-metallic dry-shake floor hardener is available for new concrete slabs in Gazipur factories and warehouses. See our floor hardener page.

Which floor is best for a washing plant in Gazipur?

Ducrete MF PU concrete. It handles hot water, chemicals and constant wet cleaning, and its texture keeps the floor slip resistant.

Free Site Inspection in Gazipur

Our technical team visits your site, checks the concrete, measures moisture and recommends the right system with a written quotation. Call 01711-037659, email info@duconasia.com or use the contact form.

Related: Epoxy flooring · PU flooring · Epoxy flooring price · PU flooring price · Projects

Related Services

Wait a moment

DPF Support
Online
Scroll to Top